OptiMount cable tray

Smart cable tray design

Designed around commercial rooftop solar installation. Less drilling, quicker cable exits and more roof fixing options.

Get a Quote Download Datasheet

OptiMount Peaked DC Lid with embossed Solar DC warning

The tray

OptiMount Cable Tray

Designed specifically for commercial PV installations. Engineered for efficiency and durability.

Flexible Mounting OptionsOverlapping fixing holes, full 3m length
Pre-Formed KnockoutsLess swarf and roof debris
Durable Peaked CoverPrevents water pooling
ZAM CoatingBuilt for outdoor solar
Regulatory ComplianceDC warning imprint on the lid

What's included

1 × 3 m Cable Tray

2 × Flat Joiners/Splicers with 4 nuts and bolts

Side knockouts

Pop it. Don't drill it.

Smartly designed for your convenience. Every Optimount cable tray features pre-formed knockouts every 200mm and set holes every 40mm allow quick and precise cable entry, minimizing roof swarf and eliminating the need for hole saws. This saves valuable time while ensuring a safer, cleaner workspace.

Pre-formed on both tray sides
Opened with ordinary pliers
No holesaw, no swarf

OptiMount cable tray at Kyneton Hospital

Overlapping mounting slots

Easy Roof Mounting

Our cable trays feature overlapping fixing holes along the entire 3m length, providing unmatched mounting flexibility and significantly reducing installation time. Say goodbye to limited spacing and hello to easier, more adaptable installations.

Slots along the full 3 m length
More fixing positions on the run
Fewer new holes to drill

ZAM coating

Cable tray you can rely on

OptiMount tray uses ZAM coating for long-term outdoor durability. At scratches and cut edges, it helps inhibit rust and cuts down zinc-spray touch-ups.

ZnZinc

AlAluminium

MgMagnesium

Made for outdoor rooftop solar
Helps inhibit rust at cuts and scratches
Fewer zinc-spray touch-ups

Side by side

Other trays vs OptiMount

OptiMount is more than a tray. It's a system designed to save time, reduce risk and streamline every solar installation.

Other trays

Another cable tray without pre-formed knockouts

OptiMount

Cable exitsNo built-in knockouts. Every cable entry is drilled by hand

Pre-formed knockouts. Punch straight through, no drilling

Roof swarfMore tools, more mess, and swarf that can damage metal roofs

No drilling for cable exits, so no roof swarf

Knockout toolNo guide holes. Measure and mark each hole, slow on angled roofs

Precision guide holes line up the tool, with no slip-outs damaging the coating

Mounting the trayA few fixed mounting points. Move fixings or drill new holes

Overlapping slots along the full 3 m length

Cuts and scratchesGalvanised trays usually get zinc-spray touch-ups

ZAM coating helps inhibit rust

Lid warningAdhesive stickers

Marking permanent in the lid

Fixing the lidMeasure, mark, drill, screw, clean up

OptiClip: hook and click, done

Lid range

OptiMount Cable Tray Lids

Revolutionise your solar installations with OptiMount Cable Tray Lids, purpose-designed for commercial PV installations. Engineered for efficiency, durability, and a professional finish, OptiMount lids set a new standard for solar and electrical installations.

Featuring “Warning Solar DC” permanently embossed directly into the metal, there’s no need for stickers that fade, peel, or fall off over time-keeping installations compliant and looking professional for the long term.

WarningSolar DC

Pressed into the metal. No stickers.

Durable Peaked CoverPrevents water pooling and adds strength.

ZAM CoatingCorrosion resistance for outdoor solar.

Regulatory ComplianceLabelling complies with AS/NZS 5033.

What's included 1× 3m Lid 3 Variations: Flat w/No Warning, Flat w/Solar Warning, Peaked w/Solar Warning

Solar DC warning · embossed

Shed the water. Keep the warning.

A water-shedding peaked profile with permanent DC identification built into the lid. The roof lid in the system, and the one OptiClip holds down.

Peaked profile helps shed water
Permanent Solar DC warning in the metal
Works with OptiClip

Ask about this lid

Tray sizes

Pick your width.

Every width has the same side knockouts, mounting slots and ZAM coating, with bends, tees, dividers and lids to match.

mm wide

End view, drawn to scale. Peaked DC Lid shown.

Tray width: 300 mm
Matching lid width: 304 mm
Tray thickness: 1.25 mm
Lid thickness: 1.08 mm
Length: 3 m
Side height: 50 mm

ZAMCoated steel

25 mmSide knockouts

5Lid options

OptiMount Datasheet 2026 (PDF)

Full part numbers, dimensions and lid sizes.

Download Datasheet

Get a quote

Spec OptiMount on your next roof.

Send us your tray layout and we'll put together a quote. Or book a demonstration and try it on a length of tray.

Get a Quote Book a demonstration

Better trays for better trades.